22216-manufacture,factory,supplier from China

Product Introduction32008X Tapered Roller Bearing produced by well-known brand SFC, belongs to the 30000 type of tapered roller bearings. The previous old model was 2007108E, And the specific parameters of 32008X Tapered Roller Bearing are: Inner diameter- 40mm, Outer diameter- 68mm, Thickness -19mm.Please refer to the following table for specific parameters of 32008X tapered roller bearing and other bearings in the same seriesBearing TypeBasic dimensionsLimit speedRated loadWeight(kg)New TypeOriginal Type(mm)d(mm)DAssembly height(mm)TGreaseOilDynamicStatic32

Product Introduction30206  Tapered Roller Bearing belongs to a single row tapered roller bearing, 30206  Tapered Roller Bearing is separable and consists of an inner ring, a retainer, and some rolling elements.

Product IntroductionInch Size Tapered Roller bearing 387/382 belongs to single row tapered roller bearings. Inch Size Tapered Roller bearing 387/382 using high-quality bearing steel with uniform hardness and advanced heat treatment technology, it has better wear resistance.

Product Introduction30207 Tapered Roller Bearing is single row tapered roller bearing, with interchangeable inner and outer sleeves. 30207 Tapered Roller Bearing belongs to a separated type bearing, and both the inner and outer rings of the 30207 Tapered Roller Bearing have tapered raceways.

Product Introduction30307 Single Row Tapered Roller Bearing belongs to metric 30000 series.Use top pressure retainer,superfinishing roller,all combination heights have been measured,ensure the quality.The 30307 tapered roller bearing belongs to the separated type bearing, and both the inner and outer rings of the bearing have tapered raceways.

Product IntroductionLM48548/LM48510 Inch Size Tapered Roller Bearing made of high-quality steel, it has excellent load-bearing capacity and wear resistance.By adopting optimized design and manufacturing processes, it can adapt to the requirements of high-speed operation.LM48548 is the inner ring, and LM48510 is the outer ring.LM48548/LM48510 Inch Size Tapered Roller Bearing inner diameter is 34.925mm, outer diameter is 65.0875mm, and thickness is 18.034mm.Weight 0.249kg.Cr (rated dynamic load): 48kn                       Cor (rated st

Product Introduction32228 tapered roller bearings are made of high-quality technology and high-quality bearing steel, with a smooth and smooth surface and uniform rotational speed.

Product Introduction30304 Single Row Tapered Roller Bearing consists of a conical inner ring, outer ring, tapered roller, and retainer.It is suitable for the metric 30000 series of tapered rollers.Tapered roller bearings also have double row bearings, paired double row bearings, and four row bearings.

Product IntroductionThe dimensional parameters of SFC 30309 Tapered Roller Bearing include an inner diameter of 45.000 mm, an outer diameter of 100.000 mm, and a thickness of 27.250 mm.

Product Introduction32208 Single Row Tapered Roller Bearing adopt advanced GCR15 materials,top pressure cage,super finishing rollers.32208 Single Row Tapered Roller Bearing belongs to the metric 30000 series of tapered rollers, with  an inner diameter of 40.000 mm, an outer diameter of 80.000 mm, and a thickness of 24.750 mm.The old domestic number is 7508E.32208 Single Row Tapered Roller Bearing have specific size parameters, suitable for specific mechanical applications.

Product Introduction203KRR2 Agriculture Bearing belongs to non-standard sprocket bearings.

Production IntroductionThe tapered roller bearing 32028, with its superior design and outstanding performance, has become an ideal choice for various industrial applications.Main features:High load-bearing capacity: The unique conical design can effectively disperse loads, improve load-bearing capacity, and adapt to more demanding working environments.Excellent axial and radial load-bearing capacity: suitable for applications that require simultaneous bearing of radial and axial forces, ensuring the stability and reliability of the equipment.Wear resistant and long-lasting: Using high-quality

Product Introdution  HGW35CC Block is a flange widened slider with high positioning accuracy When linear guide is used as linear guide, because the friction mode of linear guide is rolling friction, not only the friction coefficient is reduced to 1/50 of sliding guide, but also the gap between dynamic friction and static friction becomes very small.

Product IntroductionAgricultural Bearing AP28184 is a ball bearing designed with excellent durability, low noise, and high precision. It can withstand high loads and has low frictional resistance, making it suitable for high-speed operating environments. This type of bearing is commonly used in high-speed machinery, generators, electric motors, and other equipment that require high precision and stability.2. Technical specificationsModel: AP28184Type:  ball bearingInner diameter: Depending on the specific model (e.g.

Product IntroductionN203 NU203ECP NJ203ECP Cylindrical Roller Bearing are a series of common rolling bearings mainly used to support rotating components in mechanical equipment. Here are the specific product details of these models:1. N203 (N-type bearing)Type: N203 is a single row cylindrical roller bearing, belonging to N-type bearings.Design feature: The N203 bearing has two grooves on the inner ring, while the outer ring does not have grooves, making it suitable for withstanding large radial loads.

Product IntroductionInch Size Tapered Roller bearing HM212049/11 is single row tapered roller bearing.Inch Size Tapered Roller bearing HM212049/11 belonging to separated bearings, both inner and outer rings have bearing tracks and are made of large factory steel.

Product IntrodutionEGR20 Rail Dimensions Width：20mmHeight：15.5mmLength：4000mm（Could be cut according to the actual length used）The EGR20 Rail can be paired with EGH20CA, EGW20CA, EGH20SA,EGW20SA , EGW20CB,EGW20SB sliders according to different usage scenarios.Product ApplicationEGR20 Rail is widely used in robots, semiconductors, woodworking machinery, food machinery, medical machinery, optical instrument, glass manufacturing devices, automobile manufacturing devices, automation equipment, laser engraving, blanket machinery, tile machinery, printing machinesOur factory

Product Introdution  HGR30 Linear Guide Rail is a four-row unit arc-tooth contact guide rail. HGR30 Linear Guide Rail is used in combination with HGH30CA, HAH30HA, HGW30CC and HGW30HC sliders according to different scenarios.HGR30 Linear Guide Rail has good load capacity, and can automatically adjust and absorb the assembly error of the mounting surface.

Product Introdution  HGW25CC Linear Guide Rail is a widely used specification,HGW25CC block is a type of widened slider with Flange, as compared to HGH25CA block, it is able to deliver heavier load.

Product Introdution  HGW15CC Linear Guide  Rail Block is a extensively used specification,HGW15CC Linear Guide  Rail Block is a form of widened slider with flange, as compared to HGH15CA block, it may deliver heavier load.

Product IntrodutionEGR15 Rail Dimensions Width：15mmHeight：12.5mmLength：4000mm（Could be cut according to the actual length used）The EGR15  Rail can be paired with EGH15CA, EGW15CA, EGH15SA,EGW15SA , EGW15CB,EGW15SB sliders according to different usage scenarios.The EGR15 Rail adopts an arc contact design, EGR15 Rail can withstand surface error installation and provide smooth linear motion. When the installation surface meets the accuracy requirements of installation, the high accuracy and stiffness of the guide rail will be obtained without difficulty.

Product IntrodutionHGR15 Rail Dimensions Width：15mmHeight：15mmLength：4000mm（Could be cut according to the actual length used）HGR15 Rail can be used with HGH15CA, HGW15CA,HGW15CC, HGW15CB,HGL15CA, blocks according to different usage scenarios.Product ApplicationApplication direction of HGR15 Rail : mainly in mechanical machining centers, injection machines, tool machines, precision machining machines, automation devices, cutting machines, measuring instruments, grinders, door and window processing machinery, woodworking machinery, etcHG series guide railHGR15 Rail，HGR20

Product Introdution  HGH15CA linear guide block is a widely used specification. HGH15CA linear guide block is a four-row single-arc tooth contact linear guide rail, which improves the load and rigidity compared with other linear guides.

Product Introdution  Size of HGH55CA Linear Guideway BlockWidth: 100mmLength: 166.7mmHeight: 67mmCombined height with HGR55 guide rail: 80mmProduct applicationHGH55CA Linear Guide Block is often used in machining centers, tool machines, precision machining machines, heavy-duty cutting machines, marble cutting machines, grinders, ejectors, punches, automation devices, transportation equipment, etcWhen the moving part HGH55CA Linear Guide Block moves in a straight line along the guide part, the guide rail on the guide part serves as a support and guide, supporting the moving part and e