60062RS C3-manufacture,factory,supplier from China

1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that of heavy-duty bearings. You must understand this. In order to meet different industrial production or processing needs, bearings must have different performance. The different materials of various bearings are actually due to this reason.Another point is the difference in physical structure.

The accuracy of industrial robots is a key factor directly related to product quality and production efficiency. Bearings are an important factor affecting the accuracy of industrial robots, and industrial robot bearings are required to have long lifespan, high stiffness, and low friction.Therefore, when selecting industrial robots, not only should their dynamic rated load be considered, but also the suitable values for each structural parameter should be carefully selected. The development of contemporary industrial robots is characterized by their lightweight and thinness.

The label letters of high-temperature bearings look quite messy depending on the brand and type. Generally speaking, the tail of high-temperature bearings is marked with "HT", and the following "1" and "2" tell you how high temperatures this bearing can withstand.

In industrial production, bearings, as key components of mechanical equipment, their performance and quality directly affect the operational efficiency and stability of the equipment. Many customers often pay attention to the wear resistance, load-bearing capacity, operating accuracy, and service life of bearings when choosing them.

The Chinese Lunar New Year has ended with the sound of firecrackers,and factories have started construction one after another.In the new year,hope everyone has a wide range of financial resources. We will continue to work together and create excellent results. 

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

The exhibition, PTC ASIA 2024, will be held grandly at the Shanghai New International Expo Center from November 5th to 8th. As a benchmark for the power transmission industry in the Asia Pacific region, the exhibition is themed "Intelligent, Green, and High Quality Development" and will continue to bring innovative products and solutions to the industry.

Dear users and partners:As 2024 slowly draws to a close, we welcome the hopeful year of 2025 with immense gratitude. At the beginning of this year, we express our sincerest gratitude and blessings to all the friends who have always supported us.The past year has been full of challenges and opportunities. We constantly innovate in the process of change and forge ahead with persistence. Whether it's technological innovation, service optimization, or the joint efforts of the team, they all rely on your unwavering support and trust.

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

1. Is the outer packaging clearIn general, legitimate brands have their own dedicated designers to design the external packaging and arrange factories with qualified production conditions for production. Therefore, the packaging is very clear and unambiguous from lines to color blocks.2. Is the steel stamp clearThe brand name, number, etc. will be printed on the imported bearing body of FAG. The font is very small, but most of the products produced by the factory use steel stamping technology and are pressed before being overheated.