EGH15CA Slider-manufacture,factory,supplier from China

The Chinese Lunar New Year has ended with the sound of firecrackers,and factories have started construction one after another.In the new year,hope everyone has a wide range of financial resources. We will continue to work together and create excellent results. 

The bearing ring raceway is the surface of the bearing workpiece, and its quality will directly affect the working performance and service life of the bearing. During use, we often find common quality problems on the surface of bearing rings. How do these quality problems arise? Based on years of experience, here are common quality problems and their causes on the surface of bearing rings.1.

SFC Bearing wishes you all a happy Mid-Autumn festival and National Day.From 2023.9.29-10.2 is a double  holiday.The sales department has started work.Welcome  to our inquiry.Email:sfcbearings1@gmail.com          sfcbearing@gmail.com

When determining whether the dismantled bearing can be reused, it is necessary to inspect the condition of the raceway surface, rolling surface, mating surface, wear of the cage, whether the bearing clearance has increased, and whether there are any damages or abnormalities that affect the decrease of dimensional accuracy after cleaning the bearing.

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

What is hot installation of machine tool bearings? How should we heat up the bearings of machine tools? Machine tool bearing hot installation generally refers to a heating process that involves installing the inner trap of the bearing onto the bearing block of the transmission shaft, and is divided into two processing processes: hot installation (or hot installation) and cold installation.

    On 15-18 May ,our company will participate 28th international machine tools,metalworking&automation machine tools,metalworking & automation technology exhibition in KUALA LUMPUR.     Welcome to our booth!    Booth number:3392Opening Hours:15-17 May (Wed-Fri.):10am-6pm18 May(Sat)               :10am-4pm

Bearings are crucial components for maintaining the normal operation of the vibrating screen. During normal operation, bearings should run smoothly and without any noise. However, due to poor quality or improper operation of the vibrating screen, bearings are prone to overheating, causing wear and even fracture, which seriously affects the normal use of the vibrating screen.1.Insufficient lubricationDuring the use of bearings, the internal lubricating oil is gradually consumed.

Air bearings and magnetic levitation bearings are both high-precision, non-contact bearing technologies, but their principles and application scenarios are different.1.Principle: Air bearings use the compression of gas to generate support force, which floats the rotor and achieves the function of bearings. The supporting force of air bearings mainly consists of two parts: one is the air film pressure, and the other is the inertial force.

Correct installation of bearings has a direct impact on their precision, durability, efficiency and other aspects.