HGR65-manufacture,factory,supplier from China

The high-temperature bearing needs to be replaced and new high-temperature lubricating grease needs to be added. However, this lubricating grease needs to be added just right, whether it's too much or too little won't work. How much does it need to be added specifically?What is the problem with adding too much lubricating grease to high-temperature bearings?Adding too much high-temperature lubricating grease can cause damage to the bearings.(1) Adding too much lubricating grease will increase the friction torque.

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

Our company participated in the recently concluded PTC exhibition held in Shanghai. This businss trip received interested customers from different countries, such as Italy, Brazil, Portugal, Iran, India, Türkiye... and some of them visit our factory.In the future, we hope to make progress together, work together, and achieve excellent results.Welcome your inquiry about bearings.

The Chinese Lunar New Year has ended with the sound of firecrackers,and factories have started construction one after another.In the new year,hope everyone has a wide range of financial resources. We will continue to work together and create excellent results. 

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

When replacing peripheral parts of the device, carry out regular maintenance, operational checks and inspections of the removed bearings to determine whether they can be reused and whether they are in good or bad condition.First, carefully examine and note the removed bearings and their appearance. To clarify and check the amount of residual grease, the bearings must be thoroughly cleaned&nbs

SFC Bearing wishes you all a happy Mid-Autumn festival and National Day.From 2023.9.29-10.2 is a double  holiday.The sales department has started work.Welcome  to our inquiry.Email:sfcbearings1@gmail.com          sfcbearing@gmail.com

When determining whether the dismantled bearing can be reused, it is necessary to inspect the condition of the raceway surface, rolling surface, mating surface, wear of the cage, whether the bearing clearance has increased, and whether there are any damages or abnormalities that affect the decrease of dimensional accuracy after cleaning the bearing.

    On 15-18 May ,our company will participate 28th international machine tools,metalworking&automation machine tools,metalworking & automation technology exhibition in KUALA LUMPUR.     Welcome to our booth!    Booth number:3392Opening Hours:15-17 May (Wed-Fri.):10am-6pm18 May(Sat)               :10am-4pm

1、 What is bearing chamfer?Chamfer is a term used in mechanical engineering. In order to remove burrs caused by machining on parts and to facilitate assembly, chamfers are generally made at the ends of parts. Chamfering can be seen everywhere in our daily lives, on the borders of mobile phones, on tempered doors, on vases, and so on.The general purpose of chamfering is to remove burrs and make it aesthetically pleasing.