HGW30HC-manufacture,factory,supplier from China

In the field of materials science, bearing steel and high carbon steel are two widely used types of steel, each with unique performance advantages and specific application categories. This article aims to explore the core differences between the two and how to make reasonable choices based on actual needs.The subtle differences in performance and compositionThe primary difference lies in their performance. Bearing steel stands out due to its excellent hardness advantage, which is attributed to the high content of chromium element.

When designing and manufacturing rolling bearings, the selection of bearing materials is generally based on the following principles.1、 Select according to the working conditions of the bearings①. Working temperatureBearings working at room temperature are made of chromium bearing steel. Chromium bearing steel is also used for working temperatures above 150 ℃ and below 250 ℃, but it needs to undergo special heat treatment (requiring tempering at 200 ℃ or 300 ℃).②.

1. Correct mounting: Correct mounting is the first step to protect the bearing. Make sure you select the proper bearing type, the right amount of lubricant, and the correct mounting method. Follow the manufacturer's guidelines and recommendations to ensure that the bearing is properly installed and not over-pressurized or over-loosened. 2. Keep them clean: Bearings should always be kept clean. Prevent dust, dirt, liquids or other contaminants from entering the bearing. Clean the bearings regularly and make sure the surrounding environment is clean to avoid any possible damage.3.

Process flow of bearing outer ring processing: Bearing steel ->Forging ->Annealing ->Turning ->Heat treatment ->Grinding ->Assembly ->Inspection ->Packaging and warehousingThe purpose of forging technology1. Forming: Control reasonable turning allowance.2. Obtain a high lifespan forging streamline distribution to ensure bearing life.3. Obtain the ideal metallographic structure and prepare for annealing and quenching.The purpose of annealing process1. Reduce hardness and prepare for machining.2. Obtain the ideal metallographic structure and prepare for quenching.3.

The bearing ring raceway is the surface of the bearing workpiece, and its quality will directly affect the working performance and service life of the bearing. During use, we often find common quality problems on the surface of bearing rings. How do these quality problems arise? Based on years of experience, here are common quality problems and their causes on the surface of bearing rings.1.

After the opening ceremony, Zhou Yu, Chairman of the China Bearing Industry Association, accompanied leaders and guests such as Tang Jun, Director of the General Machinery Department of the Equipment Department of the Ministry of Industry and Information Technology, and Song Zhiming, former Deputy Director of the Planning Department of the Ministry of Industry and Information Technology, to visit the exhibition and exchange ideas with major exhibitors. During the exhibition, the China Bearing Industry Association, the China Petroleum and Petrochemical Equipment Association Industry Associ

SFC Bearings Provide Optimized Services For Customers. SFC serious bearings use  unique heat treatment technology to fully utilize the characteristics of these highly pure steels. This unique heat treatment technology optimizes the wear resistance characteristics of SFC bearings without affecting their stability at high temperatures.

The accuracy of industrial robots is a key factor directly related to product quality and production efficiency. Bearings are an important factor affecting the accuracy of industrial robots, and industrial robot bearings are required to have long lifespan, high stiffness, and low friction.Therefore, when selecting industrial robots, not only should their dynamic rated load be considered, but also the suitable values for each structural parameter should be carefully selected. The development of contemporary industrial robots is characterized by their lightweight and thinness.

The so-called burn damage state of  bearings refers to the rapid heating of the raceway wheel, rolling element, and retainer of  bearings during rotation until discoloration, softening, deposition, and damage occur.The main reason for bearing burns is due to poor lubrication of  bearings, which may have used non-standard lubricants or excessive or insufficient lubricants, both of which are incorrect. Secondly, it may be due to excessive load (excessive preloading). The rotational speed is too high. The clearance is too small. There is water or other foreign objects invading.

1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that of heavy-duty bearings. You must understand this. In order to meet different industrial production or processing needs, bearings must have different performance. The different materials of various bearings are actually due to this reason.Another point is the difference in physical structure.