HGW35HC Slider-manufacture,factory,supplier from China

The 20th anniversary celebration of the 2024 Shanghai International Auto Parts, Maintenance, Testing, Diagnostic Equipment and Service Supplies Exhibition (Automechanika Shanghai) was successfully held from December 2 to 5, 2024 at the National Convention and Exhibition Center (Shanghai). The number of participating companies and visitors at this exhibition has broken previous records, fully demonstrating the important influence of Automechanika Shanghai as a professional service platform in the industry, and also reflecting the thriving development of the automotive industry.

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that of heavy-duty bearings. You must understand this. In order to meet different industrial production or processing needs, bearings must have different performance. The different materials of various bearings are actually due to this reason.Another point is the difference in physical structure.

The accuracy of industrial robots is a key factor directly related to product quality and production efficiency. Bearings are an important factor affecting the accuracy of industrial robots, and industrial robot bearings are required to have long lifespan, high stiffness, and low friction.Therefore, when selecting industrial robots, not only should their dynamic rated load be considered, but also the suitable values for each structural parameter should be carefully selected. The development of contemporary industrial robots is characterized by their lightweight and thinness.

In Shanghai,the 2023PTC exhibition was held as scheduled.On October 24-27, the 2023 Asia International Power Transmission and Control Technology Exhibition (PTC ASIA) opened grandly at the Shanghai New International Expo Center. This exhibition highlights the theme of "digital intelligence empowerment, innovation and upgrading", with an exhibition area of nearly 100000 square meters, attracting over 1500 enterprises from multiple countries and regions such as Germany and Italy to participate. As a leading enterprise in the Chinese bearing industry, Renben，TIMKEN,etc.

When replacing peripheral parts of the device, carry out regular maintenance, operational checks and inspections of the removed bearings to determine whether they can be reused and whether they are in good or bad condition.First, carefully examine and note the removed bearings and their appearance. To clarify and check the amount of residual grease, the bearings must be thoroughly cleaned&nbs

Our company participated in the recently concluded PTC exhibition held in Shanghai. This businss trip received interested customers from different countries, such as Italy, Brazil, Portugal, Iran, India, Türkiye... and some of them visit our factory.In the future, we hope to make progress together, work together, and achieve excellent results.Welcome your inquiry about bearings.

The Chinese Lunar New Year has ended with the sound of firecrackers,and factories have started construction one after another.In the new year,hope everyone has a wide range of financial resources. We will continue to work together and create excellent results. 

On November 12, at the 15th China International Aviation and Aerospace Exhibition held in Zhuhai, Guangdong Province, bearing products with multiple specifications, high precision and tip were presented at the exhibition. Wang Qiyao, Chairman of the Standing Committee of the Dalian Municipal People's Congress, visited the tile axle booth to gain a detailed understanding of the company's reform and development, technological research and development, and other aspects.