HIWIN HGH30CA-manufacture,factory,supplier from China

On the occasion of the opening of the 2023 Asia International Power Transmission and Control Technology Exhibition, on behalf of the company, I would like toextend a warm welcome to customers and friends from all over the world! Warm congratulations on the convening of the 2023 Asia International Power  Transmission and Control Technology Exhibition (PTC ASIA)!This year's PTC exhibition is particularly focused on the new ecosystem of intelligent manufacturing.

1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that of heavy-duty bearings. You must understand this. In order to meet different industrial production or processing needs, bearings must have different performance. The different materials of various bearings are actually due to this reason.Another point is the difference in physical structure.

The accuracy of industrial robots is a key factor directly related to product quality and production efficiency. Bearings are an important factor affecting the accuracy of industrial robots, and industrial robot bearings are required to have long lifespan, high stiffness, and low friction.Therefore, when selecting industrial robots, not only should their dynamic rated load be considered, but also the suitable values for each structural parameter should be carefully selected. The development of contemporary industrial robots is characterized by their lightweight and thinness.

After the opening ceremony, Zhou Yu, Chairman of the China Bearing Industry Association, accompanied leaders and guests such as Tang Jun, Director of the General Machinery Department of the Equipment Department of the Ministry of Industry and Information Technology, and Song Zhiming, former Deputy Director of the Planning Department of the Ministry of Industry and Information Technology, to visit the exhibition and exchange ideas with major exhibitors. During the exhibition, the China Bearing Industry Association, the China Petroleum and Petrochemical Equipment Association Industry Associ

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

The 2024 South China International Industrial Expo (hereinafter referred to as the South China Industrial Expo), jointly organized by Hanover Milan Exhibition (Shanghai) Co., Ltd. and Donghao Lansheng Exhibition Group Shanghai Industrial and Commercial Exhibition Co., Ltd., will make its debut at the Shenzhen International Convention and Exhibition Center (Bao'an New Hall) from June 19th to 21st.Here, the roar of machines is not only the symphony of steel, but also the rhythm of the leap in intelligent technology.

The label letters of high-temperature bearings look quite messy depending on the brand and type. Generally speaking, the tail of high-temperature bearings is marked with "HT", and the following "1" and "2" tell you how high temperatures this bearing can withstand.

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

When removing the bearings for inspection, first use photography and other methods to make a good appearance record. In addition, it is necessary to confirm the amount of remaining lubricant and sample the lubricant before cleaning the bearings.a、 The cleaning of bearings can be divided into rough cleaning and fine cleaning, and a metal mesh frame can be placed at the bottom of the container used.b、 When rough washing, use a brush or other tool to remove lubricating grease or adhesive in oil.

Bearings are widely used in various machinery and equipment, the following are some common applications:1. Machinery industry: Bearings are widely used in machine tools, wind turbines, metallurgical equipment, mining equipment, petroleum equipment, plastic machinery, textile machinery, etc.2. Automotive industry: bearings are used in engines, transmissions, clutches, suspension systems, steering systems, brakes and other automotive parts.3.