MGN9C Slider Block-manufacture,factory,supplier from China

What is hot installation of machine tool bearings? How should we heat up the bearings of machine tools? Machine tool bearing hot installation generally refers to a heating process that involves installing the inner trap of the bearing onto the bearing block of the transmission shaft, and is divided into two processing processes: hot installation (or hot installation) and cold installation.

In industrial production, bearings, as key components of mechanical equipment, their performance and quality directly affect the operational efficiency and stability of the equipment. Many customers often pay attention to the wear resistance, load-bearing capacity, operating accuracy, and service life of bearings when choosing them.

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

When determining whether the dismantled bearing can be reused, it is necessary to inspect the condition of the raceway surface, rolling surface, mating surface, wear of the cage, whether the bearing clearance has increased, and whether there are any damages or abnormalities that affect the decrease of dimensional accuracy after cleaning the bearing.

1、 What is bearing chamfer?Chamfer is a term used in mechanical engineering. In order to remove burrs caused by machining on parts and to facilitate assembly, chamfers are generally made at the ends of parts. Chamfering can be seen everywhere in our daily lives, on the borders of mobile phones, on tempered doors, on vases, and so on.The general purpose of chamfering is to remove burrs and make it aesthetically pleasing.

1. Is the outer packaging clearIn general, legitimate brands have their own dedicated designers to design the external packaging and arrange factories with qualified production conditions for production. Therefore, the packaging is very clear and unambiguous from lines to color blocks.2. Is the steel stamp clearThe brand name, number, etc. will be printed on the imported bearing body of FAG. The font is very small, but most of the products produced by the factory use steel stamping technology and are pressed before being overheated.

On November 12, at the 15th China International Aviation and Aerospace Exhibition held in Zhuhai, Guangdong Province, bearing products with multiple specifications, high precision and tip were presented at the exhibition. Wang Qiyao, Chairman of the Standing Committee of the Dalian Municipal People's Congress, visited the tile axle booth to gain a detailed understanding of the company's reform and development, technological research and development, and other aspects.

The label letters of high-temperature bearings look quite messy depending on the brand and type. Generally speaking, the tail of high-temperature bearings is marked with "HT", and the following "1" and "2" tell you how high temperatures this bearing can withstand.

The high-temperature bearing needs to be replaced and new high-temperature lubricating grease needs to be added. However, this lubricating grease needs to be added just right, whether it's too much or too little won't work. How much does it need to be added specifically?What is the problem with adding too much lubricating grease to high-temperature bearings?Adding too much high-temperature lubricating grease can cause damage to the bearings.(1) Adding too much lubricating grease will increase the friction torque.

The exhibition, PTC ASIA 2024, will be held grandly at the Shanghai New International Expo Center from November 5th to 8th. As a benchmark for the power transmission industry in the Asia Pacific region, the exhibition is themed "Intelligent, Green, and High Quality Development" and will continue to bring innovative products and solutions to the industry.