Spherical Plain Bearing GE30KRRB-manufacture,factory,supplier from China

(Total 24 Products for Spherical Plain Bearing GE30KRRB)
Product IntroductionSpherical Plain Bearing GE30KRRB belong to the bearing seat unit series.Model: GE30-KRR-BInner diameter: 30mmOuter diameter: 62mmThickness: 48.5mmd30  mm DSP62  mm B148,5  mm B36,5  mm C18  mm C220,7  mm Ca4,7  mm D152  mm d140,2  mm d3 max44  mm S18,3  mm W4  mm m0,39  kg Cr19500  N C0r11300  N Application AreaThe bearing seat unit has a wide range of
  Contact Now
Product IntroductionJoint bearing also called spherical plain bearing, is a type of spherical sliding bearing, with a sliding contact surface consisting of an inner spherical surface and an outer spherical surface. It can rotate and swing at any angle during motion. It is made using various special processing methods such as surface phosphating, blasting, gasket insertion, and spraying. Joint bearings have the characteristics of high load capacity, impact resistance, corrosion resistance, wear resistance, self centering, and good lubrication.Joint bearings can be divided into th
  Contact Now
Product IntroductionThe 22215CA/W33 spherical roller bearing features: high temperature resistance, low noise and high precision.
  Contact Now
Product Introduction23226 Spherical Roller Bearing details:Inner diameter: 130mm     Outer diameter: 230mm     Thickness: 80mmSpherical Roller Bearing 232 series:ItemsDimensionsWeight(kg)inner diameter (mm)outer diameter (mm)thickness(mm)232189016052.44.642322010018060.36.3823222110200709.5232241202157611.8232261302308014.5232281402508815.8232301502709619.62323216029010436.12323417031011037.123236180320112402323819034012038.623240200360128512324422040014492.22324824044016012723252260480174151232562805001761532326030054019219523226 Spherical Roller Bearin
  Contact Now
Product Introduction22318CA/W33 Spherical Roller Bearing  domestic new model: 22318CA/W33            Domestic old model: 53618K         Specification (dxDxB): 90 × 190 × 64Sub classification: Symmetrical spherical roller type, asymmetric spherical roller type, self-aligning roller bearing           weight (kg): 11.5Others Spherical Roller Bearing 223 Serise    Application22318CA/W33 Spherical Roller Bearing  has a wide range of applications, mainly used in high-temperature operati
  Contact Now
Product Introduction22213CA/WW33  Spherical Roller Bearing is double row self-aliging  roller bearing.22213CA/WW33  Spherical Roller Bearing Specification:Inner diameter: 65mm     Outer diameter:120 mm     Thickness:31 mmItemsDimensionsWeight(kg)inner diameterouter diameter thickness222052552180.177222063062200.283222073572230.43222084080230.55222094585230.59222105090230.6142221155100250.8472221260110281.222221365120311.542221470125311.662221575130311.752221680140332.22221785150362.822218901604042221995170434.2222209517043522222100180467.4
  Contact Now
Product Introduction 22219CA/W33 Spherical Roller Bearing also called 22219CA/W33 self-alinging roller bearing.Spherical Roller Bearing has CC type cages, CA type cages, and E type cages.22219CA/W33 Spherical Roller Bearing made of high-quality bearing steel with double row rollers, guaranteed quality, and complete specifications.For more details on 22219CA/W33 Spherical Roller Bearing, please consult customer service.New domestic number: 22219        Domestic old number: 3519Inner diameter (mm): 95       Outer diameter (mm): 170  &nb
  Contact Now
Product Introduction24056CA/W33 Spherical Roller Bearing is industrial product,also called self aligning roller bearing.24056CA/W33 Spherical Roller Bearing is made of high-quality bearing steel, which has high performance and is suitable for various occasions.
  Contact Now
Product Introduction22316CA/W33 Spherical Roller Bearing 140×65×48mm is a best selling model number.
  Contact Now
Product IntroductionSpherical Roller Bearings have double row rollers, the outer ring has a shared spherical raceway, and the inner ring has two raceways that are inclined at an angle relative to the bearing axis. This structure enables it to have good self-aligning performance and can compensate for axial errors.
  Contact Now
Product Introduction23148CA/W33  Spherical Roller Bearings using high-quality bearing steel, high-precision rollers, thickened cages, providing more users with high-quality choices.23148CA/W33  Spherical Roller Bearings specifications:Calculation coefficient :e0.31 y12.21 y23.29 y02.16Extreme speed r/min: grease lubrication 850 oil lubrication 1100Basic dimensions mm: d240 D400 B128 rsmin4Basic rated load KN: Cr1650 Cor3000Other dimensions mm: d2289 D1345 b16.7 k8Contact surface and chamfer size mm da (min) 258 Da (max) 382 ra (max) 3Weight: Kg68.2Application Area23148CA/W33 23148CA/
  Contact Now
Product IntroductionSpherical Roller Bearing 22313CA/W33 is a double row roller bearing that mainly bears radial loads and can also withstand axial loads in any direction.CA/W33 is the suffix of the bearing model, where CA represents the bearing with an inner guide copper cage, and W33 represents the bearing with an oil groove and hole on the outer ring.Besides Spherical Roller Bearing 22313CA/W33,there are also following models:223series223084090331.032230945100361.42231050110401.92231155120432.422312601304632231365140483.62231470150514.42231575160555.42231680170586.42231785180607.42231890190
  Contact Now
Product Introduction22348 CA/W33  Spherical Roller Bearings are self-aligning roller bearings. There are various dimensional parameters for bearings 22348CA/W33, such as weight, inner and outer diameters, thickness or height, rated static and dynamic load, reference speed, and ultimate speed.
  Contact Now
Product IntroductionW208PPB8 Disk Harrow Bearing is a special bearing for agricultural machinery, which is a kind of  square bore bearing with a spherical outer diameter.If there is an oil passage on the outer ring, this model is GW208PPB8.
  Contact Now
Product IntroductionUCP211-32 Pillow Block Ball Bearing consists of an outer spherical ball bearing UC211-32 with sealing on both sides and a cast (or stamped) bearing seat P211.There is a gap between the UCP211-32 Pillow Block Ball Bearing inner hole and the shaft.
  Contact Now
Product Introduction22334 Self-aligning Roller Bearing can also be called Spherical Roller Bearing 22334.22334 Self-aligning Roller Bearing Specification:Inner diameter: 170 mm     Outer diameter: 360 mm     Thickness: 120 mm     Dynamic load: 1580000     Static load: 2110000ItemsDimensionsWeight(kg)inner diameterouter diameter thickness222052552180.177222063062200.283222073572230.43222084080230.55222094585230.59222105090230.6142221155100250.8472221260110281.222221365120311.632221470125311.662221575130311.752221680140332.222
  Contact Now
Product IntroductionSelf Aligning Ball Bearing 1206 is a bearing equipped with spherical balls between the inner race of two raceways and the outer race of a spherical raceway.Self Aligning Ball Bearing 1206 details:Inner diameter (mm): 30          Outer diameter (mm): 62      Width (mm): 16      Grease lubrication speed (r/min): 9900     Cor (kN): 4.65Cr (kN): 15.6          Oil lubrication speed (r/min): 12000             Weight (KG): 0.22Double row aligning b
  Contact Now
Product IntroductionUCP204-12 Pillow Block Ball Bearing  belongs to a vertical seat outer spherical bearing. A spherical bearing with a seat is a bearing unit that combines a rolling bearing with a bearing seat. Most outer spherical bearings are made into spherical outer diameters and installed together with bearing seats with spherical inner holes, with diverse structural forms, good universality and interchangeability.
  Contact Now
Product IntroductionThe UCP201 Pillow Block Ball Bearing consists of two sealed outer spherical ball bearings and a cast (or steel plate stamped) bearing seat.  Usually, there is a gap between the inner hole of The UCP201 Pillow Block Ball Bearing and the shaft.
  Contact Now
Product IntroductionUCP206 Pillow Block Ball Bearing is a combination of one UC206 outer spherical bearing and one P206 Housing. There are also UCP206-18, UCP206-19, and UCP206-20 in the same seriesItem:UCP206 Pillow Block Ball BearingBrand: SFC/OEMInner diameter d: 30mmOuter diameter D: 165mmThickness:42.9mmWeight:1.1 kgsPlease download the specific parameters of UCP206 Pillow Block Ball Bearing from the homepage download center.
  Contact Now
Product IntroductionThe UCP206-20 Pillow Block Ball Bearing is composed of an spherical ball bearing with seals on both sides and a cast (or steel plate stamped) bearing housing. The internal structure of the UCP206-20 Pillow Block Ball Bearing is the same as that of the deep groove ball bearing, but the inner ring of the UCP206-20 Pillow Block Ball Bearing is wider unites wider than the outer ring.
  Contact Now
Product Introduction Self Aligning Roller Bearing 22220CA/W33 also called Spherical Roller Bearing 22220CA/W33 , Self Aligning Roller Bearing 22220CA/W33  external dimensions are inner diameter 100, outer diameter 180, and thickness 46. CA - is a symmetrical spherical roller with no blocking edge in the middle of the inner ring, and a solid cage as a whole. It has a wide range of applications and is particularly suitable for situations under heavy loads.
  Contact Now
Product IntroductionPillow Block Ball Bearing UCP213 is a metric outer ball face bearing with a seat. Pillow Block Ball Bearing UCP213's dimensions are inner diameter of 65mm, outer diameter of 65.1mm, and thickness of 268mm.Pillow Block Ball Bearing UCP213 with a seat consists of two sealed outer spherical ball bearings and a cast (or steel plate stamped) bearing seat. The internal structure of the outer spherical ball bearing UCP213 is the same as that of the deep groove ball bearing, but the inner ring of this type of bearing is wider than the outer ring.
  Contact Now
Product IntroductionSpherical Roller Bearing 22322CA/W33 belonging to the double row self-aligning roller bearing, it adopts high-quality bearing steel and CA type copper cage, with higher accuracy.
  Contact Now
Relate News
In addition to tapered roller bearings, deep groove ball bearings, outer spherical bearings, thrust bearings, and so on.Our company has developed and launched a new type of bearing - Trolley Bearings.It a non-standred type.We can customize according to your needs.Welcome your inquiry.
Bearings are a common mechanical component used to support and rotate shafts in machines. As an important component of SFC bearings, the cage plays a role in fixing the position and separating the rolling elements, while also bearing the load of the bearing. The following will introduce three types of cages for SFC bearings, their respective characteristics, and different application environments.Conventional steel plate holderThe conventional steel plate cage is the most common type of bearing cage, which is formed by stamping two or more steel plates.
When designing and manufacturing rolling bearings, the selection of bearing materials is generally based on the following principles.1、 Select according to the working conditions of the bearings①. Working temperatureBearings working at room temperature are made of chromium bearing steel. Chromium bearing steel is also used for working temperatures above 150 ℃ and below 250 ℃, but it needs to undergo special heat treatment (requiring tempering at 200 ℃ or 300 ℃).②.
1. Correct mounting: Correct mounting is the first step to protect the bearing. Make sure you select the proper bearing type, the right amount of lubricant, and the correct mounting method. Follow the manufacturer's guidelines and recommendations to ensure that the bearing is properly installed and not over-pressurized or over-loosened. 2. Keep them clean: Bearings should always be kept clean. Prevent dust, dirt, liquids or other contaminants from entering the bearing. Clean the bearings regularly and make sure the surrounding environment is clean to avoid any possible damage.3.
Process flow of bearing outer ring processing: Bearing steel ->Forging ->Annealing ->Turning ->Heat treatment ->Grinding ->Assembly ->Inspection ->Packaging and warehousingThe purpose of forging technology1. Forming: Control reasonable turning allowance.2. Obtain a high lifespan forging streamline distribution to ensure bearing life.3. Obtain the ideal metallographic structure and prepare for annealing and quenching.The purpose of annealing process1. Reduce hardness and prepare for machining.2. Obtain the ideal metallographic structure and prepare for quenching.3.
In recent years, ceramic bearings have been increasingly used in various fields, such as aviation, aerospace, navigation, petroleum, chemical, automotive, electronic equipment, metallurgy, power, textiles, pumps, medical equipment, scientific research, and national defense and military. The advantages of using ceramic bearings in new products are becoming increasingly apparent. The following is a specific understanding of the advantages of using ceramic bearing materials.The advantages of ceramic bearing materials mainly include the following:1.
1. SKF launches new generation of ball bearing products: SKF, the world's leading bearing manufacturer, announces the launch of a new generation of ball bearing products. This new product has a longer service life and higher load carrying capacity while improving bearing performance and reliability. 2. NSK launched self-lubricating bearing technology: Japan's NSK recently launched an innovative self-lubricating bearing technology. This new technology can significantly reduce the friction and wear of bearings, improving the efficiency and service life of equipment. 3.
Bearing steel is a steel used to manufacture balls, rollers, and bearing rings. Bearings bear great pressure and friction during operation, so it is required that the bearing steel has high and uniform hardness and wear resistance, as well as high elastic limit.
(1) Linear bearing cages can be divided into stamped and solid types:a. Stamping cage: commonly made of steel plate, sometimes also made of copper plate. The advantage of this type of cage over metal solid cages is its lighter weight. The stamping cage occupies a small gap between the inner and outer rings of the linear bearing, making it easy for lubricating oil to enter the linear bearing and remain in the cage. According to the code principle, the stamping cage is only written into the code when it is not used as a standard structure.b.
After the opening ceremony, Zhou Yu, Chairman of the China Bearing Industry Association, accompanied leaders and guests such as Tang Jun, Director of the General Machinery Department of the Equipment Department of the Ministry of Industry and Information Technology, and Song Zhiming, former Deputy Director of the Planning Department of the Ministry of Industry and Information Technology, to visit the exhibition and exchange ideas with major exhibitors. During the exhibition, the China Bearing Industry Association, the China Petroleum and Petrochemical Equipment Association Industry Associ