1、 What is bearing chamfer?Chamfer is a term used in mechanical engineering. In order to remove burrs caused by machining on parts and to facilitate assembly, chamfers are generally made at the ends of parts. Chamfering can be seen everywhere in our daily lives, on the borders of mobile phones, on…
2024/04/01 10:03
Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel…
2024/03/29 09:01
In recent years, ceramic bearings have been increasingly used in various fields, such as aviation, aerospace, navigation, petroleum, chemical, automotive, electronic equipment, metallurgy, power, textiles, pumps, medical equipment, scientific research, and national defense and military. The…
2024/03/27 10:08
What material is bearing steelBearing steel is a steel used to manufacture balls, rollers, and bearing rings. Bearing steel has high and uniform hardness, wear resistance, and high elastic limit. Strict requirements are placed on the uniformity of chemical composition, content and distribution of…
2024/03/23 13:25
The accuracy of industrial robots is a key factor directly related to product quality and production efficiency. Bearings are an important factor affecting the accuracy of industrial robots, and industrial robot bearings are required to have long lifespan, high stiffness, and low friction.Therefore…
2024/03/20 15:29
Bearings are an important component in contemporary mechanical equipment, whose main function is to support the rotating body of the machinery, reduce the friction coefficient during its movement, and ensure its rotational accuracy. Rolling bearings generally consist of four parts: outer ring,…
2024/03/17 15:09
When designing and manufacturing rolling bearings, the selection of bearing materials is generally based on the following principles.1、 Select according to the working conditions of the bearings①. Working temperatureBearings working at room temperature are made of chromium bearing steel. Chromium…
2024/03/12 09:46
Bearing steel is a steel used to manufacture balls, rollers, and bearing rings. Bearings bear great pressure and friction during operation, so it is required that the bearing steel has high and uniform hardness and wear resistance, as well as high elastic limit. Strict requirements are placed on…
2024/03/09 17:43
1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that…
2024/03/04 14:45
The installation of linear bearings requires a lot of attention to methods. Whether you are installing high-quality imported bearings or domestically produced bearings with average quality, it may affect the service life and performance of the bearings. Therefore, when installing linear bearings,…
2024/02/27 10:55
Bearings are crucial components for maintaining the normal operation of the vibrating screen. During normal operation, bearings should run smoothly and without any noise. However, due to poor quality or improper operation of the vibrating screen, bearings are prone to overheating, causing wear and…
2024/02/24 15:33
The metallurgical quality of bearing materials was once the main factor affecting the early failure of bearings. With the improvement of metallurgical technology (such as vacuum degassing of bearing steel), the quality of raw materials has been improved. The proportion of raw material quality…
2024/02/20 15:11
